Email:
sales@wcscnet.com


Competent Technical Support By Knowledgeable Engineers

View Cart

Checkout

RSS Feed
Home
Products
Services
Support
File Download
Testimonials
NewsLetters
Press Releases
Tutorials
WebLog (News)
WCSC Partners
Developer Tools

Register for WCSC email updates

Wires No More!
$159.99 a pair

Wireless Serial Adapter
(Bluetooth to RS232)

 

Credit Card Merchant Services

Bluetooth Wireless Serial Module Support
(P/N HDWBTRS232Mod)

Generally the wireless serial adapters are sold in pairs. Before the devices can be used they must be paired. Pairing creates a virtual link between two unique wireless serial adapters. This can be done by using our Configuration Utilities or manually by following the document at Manual pairing of two Wireless Serial Adapters.

 

Configuration Utility This utility is used to read, setup, and pair the wireless adapters.
Documentation (Manual) Product documentation.
Manual pairing of two Wireless Serial Adapters. This document details how to manually pair two Wireless Serial Adapters to create a wireless serial cable. Note that it is much simpler to use the configuration utility above. Use this only if your environment does not allow the installation of the utility or if the utility is incompatible with your environment.
Manual pairing of Wireless Serial Adapter with Bluetooth device. This document details how to manually pair one or more of the Wireless Serial Adapters with a USB dongle or a computer with Bluetooth.
Setting up one wireless serial adapter as master to connect to multiple wireless serial adapters. This document details how to setup one master Wireless Serial Adapter to connect/disconnect  to/from one or more Wireless Serial Adapter(s) using the configuration utility.


Questions & Answers

  1. Pin Assignments On Module

  1. How should the wireless adapter be configured for a device that requires a line configuration other than no parity, 8 databits, one stopbit.

Always set the adapter to 8 databits, no parity, one stopbit. The device is simply a conduit of bits.
  1. How do I pair the wireless adapter with a Bluetooth computer or Bluetooth dongle?

To learn how to pair the Bluetooth wireless serial adapter with another Bluetooth device <click here>.
  1. How do I configure for Even Parity, 7 Data Bits, One Stop Bit (E71)?

Set Line Characteristic for Device/Computer Connected to Wireless Adapter1 : 9600,7,e,1
Set Line Characteristics for Wireless Adapter1 to: 9600, 8,n,1
Set Line Characteristics for Wireless Adapter2 to: 9600, 8,n,1
Set Line Characteristic for Device/Computer Connected to Wireless Adapter2 : 9600,7,e,1

This will work in most of the cases because Bluetooth adapter only cares of number of bits and not of meaning of those.

 
 
 

 
Copyright © 2008 by Willies Computer Software Co