| [0001] |
What causes WCSCVxDInitializePort(),
WCSCVxDOpenPort(), or WCSCVxDSetup() to return an error (usually
RS232ERR_NOOTHERES/45) even though the IRQ, address, and all other
parameters appear to be correct for COM1 or COM2?
|
| [0002] |
Can I run an application written with COMM-DRV/NT
under Windows 95 or Windows 98?.
|
| [0003] |
What values should I use in WCSCVxDOpenPort() for
initializing PCI Cards.
|
| [0004] |
Using
COMM-DRV/NT with WCSC’s PCI Multiport Cards Under Windows 2000 & Windows XP |
|
[0005] |
I
have an ISA multiport card installed. I have selected an available IRQ and
address range. I can open the port, however data will not be transmitted
or received. What is the problem? |
| [0006] |
What causes an error 45 when trying to open a port on a PCI
card that had a port previously opened and closed? |
| [0007] |
Using
COMM-DRV/NT with Quatech's PCMCIA Cards (SSP-100,
SSP-200/300, DSP-100, DSP-200/300, QSP-100, QSP-200/300) |
| [0008] |
No data is received or sent even though port was opened
without errors with WCSCVxDOpenPort() or WCSCVxDInitializePort(). |
| [0009] |
If an application exits or crashes before a serial port opened with
COMM-DRV/NT is closed, an error occurs when attempting to reopen the port. |
| [0010] |
Several bytes have the same
timestamp value when I use the TIMESTAMPBYTES with COMM-DRV/NT. |
| [0011] |
COMM-DRV/NT application
crashes with a blue screen when minimized. |
| [0012] |
COMM-DRV/NT will not
install on Windows Server 2003. |
| [0013] |
Test COMM-DRV/NT's access to serial
ports. |
| [0014] |
COMM-DRV/NT seems to have a memory leak after some time of operation. |
RSS
Feed
