1, 2, 4, & 8 Port Universal PCI RS232 Cards
1
Port RS232
P/N
HdwP1232550u
Mfg P/N SSCLP-100
$109.00 |
2
Port RS232
P/N HdwP2232550u
Mfg P/N DSCLP-100
$159.00 |
4
Port RS232
P/N HdwP4232550u
Mfg P/N QSCLP-100
$229.00 |
| |
8
Port RS232
P/N HdwP8232750u
Mfg P/N ESCLP-100
$399.00 |
|
Features
- 1, 2, 4 or 8 independent RS-232 ports
- Speeds up to 921.6 kbps
- Universal PCI connector compatible with 3.3V and 5V systems
- MD1 Low Profile Board (fits 2U racks without riser cards)
- 16550 UARTs with 16-byte FIFOs (1,2,4 Port Cards)
- 16750 UARTs with 64-byte FIFOs (8 Port Cards)
- Full modem control and hardware and software flow control
- Standard DB-9 connectors
- Windows Vista, Windows 95/98/Me/NT/2000/XP & Linux support
- 5 year warranty
- Compatible with our Serial Communication
Libraries & Utilities.
Description
Our RS-232 UPCI boards completely meet the PCI 2.3 specification for
Universal connectivity and Low Profile boards, as well as all other aspects of
the specification so that you can be certain that every one of our Universal PCI
boards will function properly and perform reliably in your system. Serial port
connection are made via an onboard DB-9 male port for single port models, and
via included cables providing two or four DB-9 male connectors for multiport
boards.
The new Low Profile PCI footprint was designed to provide greater flexibility
for embedded systems, thin-clients, and desktop and server environments. The
boards are mechanically similar to standard PCI boards, but use a shorter board
and a different mounting bracket. They are designed to fit into systems as low
as 3.350" without using riser cards. The boards are built on 32-bit addressing,
and can be used in standard PCI backplanes or with specialized Low Profile PCI
brackets. Our RS-232 boards are built using the smallest (MD1) Low Profile board
specification, which allows them to be used in even the smallest size systems
without riser cards.
PCI 2.3 requires that all plug-in cards support 3.3V signaling. However, many
systems still use 5V signaling. To accommodate both system types, our Low
Profile boards also use a Universal PCI connector compatible with both 3.3V and
5V signaling. This means that they can be used with current equipment, and will
not need to be replaced as systems are upgraded. It also means that a single
serial board solution can be used across a diverse network comprised of many
different types of computer
These cards are all compatible with our serial
communication libraries and utilities.
Last modified:
04/03/2008 |
RSS
Feed
